Introduction to Titanium Carbide TiC Powder

(Introduction to Titanium Carbide TiC Powder)

An Introduction Titanium Carbide TiC Powder

Titanium carbide, also known as TiC is a typical transition metal carbide that features a NaCl hexagonal crystal structure. a high melting point, hardness, high Young’s modulus, excellent chemical stability, high wear and corrosion resistance, and excellent thermal and electrical conductivity. Therefore, it has many different applications and excellent potential for cutting tools aerospace components, wear-resistant coatings, foam ceramics, and infrared radiation ceramics materials.

applications of Titanium Carbide TiC Powder

1. In the manufacture of various multiphase materials

Titanium carbide-based ceramics are super-hard tool materials, TiC and TiN, WC, A12O, along with other raw materials made from various multiphase ceramic materials They have a very high melting temperature, a high hardness and exceptional chemical stability. is the most popular material for cutting tools and wear-resistant equipment however, they exhibit excellent electrical conductivity, is the preferred material for electrodes.

Cutting tool material. Because of a percentage of TiC hard particles dispersed in the matrix, composite cutting tools are not just able improve the toughness as well, but also, to a some extent, enhance the strength of the fracture, more than that of pure tool cutting capabilities a great deal. A12o3-tic ceramics can be used as armor material. A tool material the hardness is greater than (C N, C) and Ti(C, N) because of N to make it on steel and other cutting materials friction coefficient is greatly reduced. There are many advantages of cutting. By combining the advantages Ti and (C, N) to create multiphase materials, a promising tool material can be prepared.

2. Useful as coating materials

Diamond coating: The manufacturing method for diamond tools is typically the impregnation of powder metal using the method. Due to the high interfacial energies between diamond and more general metallic or alloy, the diamond’s surface is not affected by any alloy or metal with a lower melting point, and its bond performance is not great. In recent years, many researchers have conducted lots of studies on increasing the bond strength between diamond and metal matrix. The method that is active is the one that is most commonly employed technique, which involves adding some titanium to metal bond, vanadium, chromium, and other active metals. When used to sinter liquids and the active metal is composed of high carbon molecules to form elements and the affinity for diamonds is huge, which allows for enhance the diamond’s surface and thereby achieving the metallurgical bond of diamond and metal bond. The strength of the bond is influenced by the amount of active metal in the mix, as well as the temperature of sintering and time as well as other parameters, and requires to dissolve the binder in order to allow the enhancement of active metal to the interface because this method is not appropriate for hot pressing sintering of the diamond and metal powder with a quick time solid phase.

3. This is the method used to prepare foam ceramics

as a filtering agent, ceramics remove inclusions in all fluids as well as its filtration process is an agitation process and adsorption. The filter is dependent on the chemical solidity of the substance, particularly in the metalurgical industry that uses a high melting filter, so this type of material will oxidize in the majority, but also to be able to adapt to the metal filter melts, which is the major goal that is thermal shock resistance. Titanium carbide foams offer higher strength, hardness, heat and electrical conductivity, and also have better resistance to heat and corrosion than oxide foam ceramics.

4. Used in infrared radiation ceramic materials

Titanium carbide is an example of intermetallic compounds, which have generally displayed good chemical stability. having no change in valence in the system. under the condition of high-temperature reduction of the preparation of samples. The titanium ions can show delay to show up, aiming to the solid of titanium ions melting into the cordierite structure position, change of the structure. When compared with a single substance its radiation performance of the substance near 3tma is significantly improved, and is beneficial for the use in the area of high temperature.

Main Distributor of Titanium Carbide TiC Powder

We are a respected global chemical material supplier and manufacturer with over 12 years of experience manufacturing high-end chemicals and Nanomaterials. This includes silicon powder, nitride powder, graphite , zinc sulfide, calcium nitride3D printing and others.

If you’re seeking high-quality titanium carbide TiC granules Please feel free to connect with us and send us an inquiry. (brad@ihpa.net)

(Introduction to Titanium Carbide TiC Powder)