If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
1. Spraying or cleaning
When it comes to rough surfaces such as concrete, cement mortar, and upreared concrete frameworks, splashing is much better. In the case of smooth surfaces such as stones, marble, and granite, cleaning can be utilized.
Before use, the base surface must be meticulously cleaned, dirt and moss must be cleaned up, and cracks and holes ought to be sealed and fixed ahead of time and loaded tightly.
When making use of, the silicone waterproofing agent should be used three times up and down and flat on the completely dry base surface area (wall surface area, and so on) with a tidy agricultural sprayer or row brush. Remain in the center. Each kg can spray 5m of the wall surface. It must not be subjected to rainfall for 1 day after construction. Building and construction ought to be stopped when the temperature level is below 4 ℃. The base surface area need to be completely dry throughout building. It has a water-repellent impact in 24-hour at room temperature level, and the result is better after one week. The healing time is longer in winter season.
2. Include cement mortar
Clean the base surface, tidy oil discolorations and floating dust, get rid of the peeling off layer, and so on, and seal the cracks with adaptable materials.
Distributor
TRUNNANO is a supplier of nano materials with over 12 years experience in nano-building energy conservation and nanotechnology development. It accepts payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea. If you want to know more about sodium metasilicate, please feel free to contact us and send an inquiry.
Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the electrical, electronics, energy and petrochemical sector…
Tungsten-nickel-copper/iron alloy is characterized by low thermal expansion, high density, radiation absorption and high thermal and electrical conductivity. It is widely utilized in the aerospace and medical industries. About High Density Tungsten…
Antimony sulfide can be used to make matches, fireworks and colored glass. It is used in rubber manufacturing as a military and vulcanizing agent.Particle size: 100mesh Purity: 99.99% Antimony Sulfide Sb2S3: Sulfide can be bismuth or black powder…